Certificate IV in Engineering (Instrumentation)

National ID: MEM40105
State ID: WT46
Qualification level: Certificate IV

Course is available at the following locations

Public
Central Regional TAFE

<h3>Take the next step with your engineering career and develop further skills to set you apart.</h3>
<p>This qualification covers the skills and knowledge required for employment as a Higher Engineering Tradesperson or a Special Class Engineering Tradesperson (Mechanical) - Level II, Special Class Engineering Tradesperson (Fabrication) - Level II, Special Class Engineering Tradesperson (Electrical/Electronic) - Level II within the metal, engineering, manufacturing and associated industries or at equivalent levels in other industries where Engineering Tradespersons work.</p>
<p>The qualification has been specifically developed to be delivered to people who are existing engineering tradespersons or delivered to apprentices in an Engineering Trade who choose to study at a higher level during their apprenticeship.  The qualification packaging has been developed on the assumption that competency will be developed through an integrated combination of on and off the job learning strategies such as those delivering through a formal apprenticeship.</p>
<p>Much of this qualification is available for Recognition of Prior Learning.</p>
<p>You will gain knowledge and skills in:</p>
<ul>
<li>design</li>
<li>assembly</li>
<li>installation</li>
<li>modification</li>
<li>manufacturing</li>
<li>testing and maintenance.</li>
</ul>

Course description

<h3>Take the next step with your engineering career and develop further skills to set you apart.</h3>
<p>This qualification covers the skills and knowledge required for employment as a Higher Engineering Tradesperson or a Special Class Engineering Tradesperson (Mechanical) - Level II, Special Class Engineering Tradesperson (Fabrication) - Level II, Special Class Engineering Tradesperson (Electrical/Electronic) - Level II within the metal, engineering, manufacturing and associated industries or at equivalent levels in other industries where Engineering Tradespersons work.</p>
<p>The qualification has been specifically developed to be delivered to people who are existing engineering tradespersons or delivered to apprentices in an Engineering Trade who choose to study at a higher level during their apprenticeship.  The qualification packaging has been developed on the assumption that competency will be developed through an integrated combination of on and off the job learning strategies such as those delivering through a formal apprenticeship.</p>
<p>Much of this qualification is available for Recognition of Prior Learning.</p>
<p>You will gain knowledge and skills in:</p>
<ul>
<li>design</li>
<li>assembly</li>
<li>installation</li>
<li>modification</li>
<li>manufacturing</li>
<li>testing and maintenance.</li>
</ul>

Campus locations

Course page link
Public
South Metropolitan TAFE

<p>Are you working in the engineering industry and looking to advance your career further? The Certificate IV in Engineering (Instrumentation) has been specifically designed for any qualified tradesperson such as unrestricted electricians, electrical fitters, engineers in the resource industry, refrigeration technicians, or for apprentices in their third or fourth year of study. Learn to install, commission, calibrate and maintain modern instrumentation and control systems, as well as loop turning of multi controller or multi element systems. Our skilled staff and industry-standard facilities prepare you with job-ready skills. </p>
<h4>Gain these skills:</h4>
<ul>
<li>PLC training</li>
<li>P &amp; I diagram</li>
<li>Feedback systems</li>
<li>Intrinsic safety</li>
<li>Analytical skills</li>
<li>Pressure, level, flow &amp; temperature</li>
<li>PID</li>
<li>Fluid power</li>
<li>Pneumatic instruments</li>
<li>Variable speed drives</li>
<li>Valve sizing </li>
<li>Advanced control </li>
<li>Engineering maths </li>
</ul>
<p>A significant portion of this course is available for Recognition of Prior Learning. If you hold an electrical trade license or Certificate III in Engineering, we offer units to enable you to complete this qualification.  They are:</p>
<ul>
<li>MEM18064B                       Maintain instrumentation system components</li>
<li>MEM18054B                       Fault find, test and calibrate instrumentation systems and equipment</li>
<li>MEM18062B                       Install, maintain and calibrate instrumentation sensors, transmitters and final control elements</li>
<li>MEM18060B                       Maintain, repair control instrumentation - single and multiple loop control systems</li>
<li>MEM18067B                       Tune control loops - multi controller or multi element systems</li>
<li>MEM10004B                       Enter and change programmable controller operational parameters (optional but recommended)</li>
<li>MEM10005B                       Commission programmable controller programs (optional but recommended)</li>
</ul>
<p>See below for all units which complete this course.</p>

Course description

<p>Are you working in the engineering industry and looking to advance your career further? The Certificate IV in Engineering (Instrumentation) has been specifically designed for any qualified tradesperson such as unrestricted electricians, electrical fitters, engineers in the resource industry, refrigeration technicians, or for apprentices in their third or fourth year of study. Learn to install, commission, calibrate and maintain modern instrumentation and control systems, as well as loop turning of multi controller or multi element systems. Our skilled staff and industry-standard facilities prepare you with job-ready skills. </p>
<h4>Gain these skills:</h4>
<ul>
<li>PLC training</li>
<li>P &amp; I diagram</li>
<li>Feedback systems</li>
<li>Intrinsic safety</li>
<li>Analytical skills</li>
<li>Pressure, level, flow &amp; temperature</li>
<li>PID</li>
<li>Fluid power</li>
<li>Pneumatic instruments</li>
<li>Variable speed drives</li>
<li>Valve sizing </li>
<li>Advanced control </li>
<li>Engineering maths </li>
</ul>
<p>A significant portion of this course is available for Recognition of Prior Learning. If you hold an electrical trade license or Certificate III in Engineering, we offer units to enable you to complete this qualification.  They are:</p>
<ul>
<li>MEM18064B                       Maintain instrumentation system components</li>
<li>MEM18054B                       Fault find, test and calibrate instrumentation systems and equipment</li>
<li>MEM18062B                       Install, maintain and calibrate instrumentation sensors, transmitters and final control elements</li>
<li>MEM18060B                       Maintain, repair control instrumentation - single and multiple loop control systems</li>
<li>MEM18067B                       Tune control loops - multi controller or multi element systems</li>
<li>MEM10004B                       Enter and change programmable controller operational parameters (optional but recommended)</li>
<li>MEM10005B                       Commission programmable controller programs (optional but recommended)</li>
</ul>
<p>See below for all units which complete this course.</p>

Campus locations

Course page link